Features:

• Powerful 15 amp, 4,500 RPM motor
• Twin laser guide system indicates the cut line on both sides of the blade kerf for reliable cuts every time
• Dual compound cuts (miter and bevel) up to 45° left & right
• 3” x 13-3/8” Straight cut capacity at 90°
• Electronic brake
• Sturdy aluminum die-cast construction
• Rotating table has 9 positive stops at 0°, 15°, 22.5°, 30° and 45° right and left
• Bevel positive stops at 90°, 15°, 30° and 45° right and left
• Adjustable sliding fence extensions for extra support
• High quality carbide blade included
• Comes complete with a 2 position vertical hold down vise, extension wings, dust bag and blade socket wrench
• Enhanced Twin Laser Effect
  

Features:

• Table tilts to allow versatile angle cutting
• Saws comes complete with rip fence, diamond blade and coolant system
• Stainless steel table
• Ideal for jobs where portability is a concern
• Reversible arbor and miter gauge (KC-3007 only)
  

Features:

• Excellent for cutting curves and compound angles
• 15° left, 45° right square tilting table
• Quick connect motor to switch plug for easy-set up
• Dust chute
• Induction motor, blade and miter gauge included
• Comes complete with sturdy open stand
  

Features:

• Adjustable upper/lower ball bearing blade guide system
• Excellent for cutting curves and compound angles
• 10° left, 45° right, square tilting table
• Hinged doors for quick access to blade
• Quick connect motor to switch plug for easy set-up
• Dust chute
• Built-in brush cleans drive wheel during operation
• Comes complete with induction motor, blade, miter gauge, enclosed cabinet stand and rip fence with resaw guide
  

Features:

• Built-in dust blower system
• Table tilts to allow angle cutting up to 45°
• Blade holders accept standard 5” pinless and pin type blades
• Portable and versatile
• Adjustable blade tension knob
• Variable speed
  

Features:

• Powerful 15 amp. ball bearing induction motor
• Large switch handle for safe and easy operation
• Standard 14" abrasive wheel for cutting ferrous metal
• Spark deflector for safe operation
• Heavy-duty steel base with foot pads minimizes vibration for sturdy operation
• Quick release vise for holding workpiece, which allows cuts up to a 45° angle
• Sturdy metal guard with retractable lower guard
• Large rubber gripped handle facilitates transport
  

Features:

• Powerful 15 amp ball bearing motor
• Blade tilts 0° to 45° for versatile angle cutting
• Single lever cam-locking handle on rip fence
  locks front and rear for accurate ripping
• See-through blade guard with anti-kickback pawls
• Comes with 10” x 28 tooth carbide ripping blade,
  rip fence, miter gauge & wrenches
  

Features:

• Ideal for undercutting baseboard, walls, door jambs, under toe-spaces and inside corners
• The height of cut is adjustable from flush to 1” above the floor with 1/8" graduated scale for working with different floor coverings from sheet vinyl to thick ceramic tile and wood
• The depth of cut is adjustable to suit a variety of material thicknesses from 0 - 1-1/4” with an adjustable fence
• Large, flat base prevents tipping and assures accurate, level cutting
• Comes with a 40 tooth depressed center carbide tipped blade, hex. keys and sturdy carrying case

Comes with sturdy carrying case


1-1/4” Vacuum fitting for dust control

Features:

• 4 Settings, straight cutting and 3 orbital
• Adjustable aluminum base allows for bevel cutting from 0º - 45º to the right and left
• Rotary speed dial for setting the desired speed
• Lock-on button for continuous operation
• Accepts all standard blade shanks
• Comes with a selection of 6 jig saw blades, adaptable dust chute, metal and non-marring plastic base inserts, hex. key and sturdy carrying case

Comes with sturdy Carrying Case

Features:

• Laser guide system indicates the cut line
  11 amp., 4500 R.P.M.
• All ball bearing construction
• Ergonomic handle grip with safety button trigger switch
• Durable steel shoe with depth adjustment and
  adjustable bevel stops at 0° and 45°
• Lower blade guard lifting lever for safe and easy access to the blade
• Comes with 24 tooth carbide tipped blade, arbor
  wrenches, replacement brushes and adjustable rip guide
  

Features:

• Tool-less quick release blade change system (model 8329)
• Switch between laser gutting line or LED work light (model 8329)
• 4 settings, straight cutting and 3 orbital
• Adjustable base allows for bevel cutting from 0°- 45° to the right and left
• Variable speed dial for setting the desired speed
• Accepts BoschTM tang style blades (model 8329)
• Accepts all standard blade shanks (model 8332)
• Adjustable dust blower system provides a stream of air that blows dust away from the cut line (model 8329)
• Comes with jig saw blades, edge guide, dust chute, hex. keys and sturdy carrying case

Comes with sturdy carrying case

Features:

• Powerful 3/4 HP motor
• Chromed steel sliding table
• Adjustable aluminum fence and push plate
• Features a meat grinder with 3 interchangeable knives, sausage filler and meat packer
• Adjustable upper blade guide system
• Perfect for hunters and butchers

Meat grinder and accessories included

Features:

• Laser guide system indicates the cut line for reliable cuts every time
• 3/4 HP Direct drive, 3,600 RPM motor
• Reversible arbor flange allows you to install a 7” continuous rim blade with either a 5/8” or 7/8” bore
• Quick connect motor to pump plug for easy hook-up
• Adjustable water pump flow
• Convenient reset button
• Comes complete with 7” diamond continuous rim blade, 45° & 90° rip guides and sturdy folding stand
• Enhanced Laser Effect